Sell cummins diesel generator 100kva
Descripción
Section A. Technical Specification
The main parameters of the set
The model of the unit: KTC-100GF
Prime power: 100KVA
Rated voltage: 220V
Rated current: 115.2A
Rated frequency: 50Hz
The factor of rated power COS=0.8lagging
The regulating rate of steady voltage: ≤ 1%
The regulating rate of instantaneous voltage: -15%~ +20%
The time of steady voltage: ≤ 1.5sec
The waving rate of voltage: ≤ 1.0%
The regulating rate of steady frequency: ≤ 3%
The regulating rate of instantaneous frequency: ≤ ± 10%
The time of steady frequency: 3sec
The waving rate of frequency: ≤ 1%
Displacement (L): 5.9
The waste of fuel with full load: ≤ 210g/kwh
Lube-oil consumption (L): 16.4
Dimension (silent type) (L× W× H) (mm): 3000× 1240× 1760
Package(plywood case) dimension (silent type) (L× W× H)(mm) 3100× 1340× 1910
Net weight (silent type) (kg): 1100
Gross weight (silenttype) (kg): 1250
The main parameters of the diesel engine
Brand: CUMMINS
Model: 6BT5.9-G2
Type: four strokes, waste gas turbine boost, direct spurting type
Cylinder: 4 cylinders
Cooling way: water cooling
Rotating speed: 1500r/min
The regulation of rotating speed: Electrical speed regulator
Starting way: DC24V starting with electricity
The main parameters of the generator
Brand: Kaijieli(China-French joint venture Leory Somer technology)
Model: TWGII224FC
Type: Brushless, Self-excite, AVR automatic voltage regulating
The connecting way of the phase: three phases four lines
Insulation degree: H degree
Enclosure degree: IP21-IP23
4. Specification of control Panel(with KAIXUN LCD controller)
The control panel is Ordinary integrative type control panel, with the display of voltage, current, frequency, water temperature, oil pressure. The genset with low oil pressure, high water temperature, over speed, over load protection function.
The features of KAIXUN LCD controller:
KAIXUN LCD controller adopts high performance computer chip, can modify control procedure and protection parameters of generator, which incorporating measure, control, protection and three remote functions and so on, can fully satisfactory different kinds of Genset auto control requirements for generator user and or special assembly factory.
The controller measure and display all output digital parameters for generator, and rpm, oil pressure, water temperature, DC voltage and runtime for engine. And the voltage and current use real virtual value measure to make sure the data more exacter.
• Chinese/English menu for your choice, large LCD display.
• Can select kinds of preset PT-sensor, and can custom parameter by corresponding software.
• Keys on control panel are used for selecting control mode, startup running procedure, data display and modify the protection parameter. LED indicator is used for indicating the controller running mode and Genset running status, and LCD display measuring parameter and status.
• Can select RS485 or RS232 communication port, realizing long distance monitor, and or fully realizing remote signaling, telemetering and remote control functions by communication with PC, can read and setting controller running parameter.
• The controller is assembled by high strength plasticized panel and powdered steel shell, all connection are connected by pin-like and locked up terminal, more easier and convenient to connect, move, maintain and replace.
The main parameters of the set
The model of the unit: KTC-100GF
Prime power: 100KVA
Rated voltage: 220V
Rated current: 115.2A
Rated frequency: 50Hz
The factor of rated power COS=0.8lagging
The regulating rate of steady voltage: ≤ 1%
The regulating rate of instantaneous voltage: -15%~ +20%
The time of steady voltage: ≤ 1.5sec
The waving rate of voltage: ≤ 1.0%
The regulating rate of steady frequency: ≤ 3%
The regulating rate of instantaneous frequency: ≤ ± 10%
The time of steady frequency: 3sec
The waving rate of frequency: ≤ 1%
Displacement (L): 5.9
The waste of fuel with full load: ≤ 210g/kwh
Lube-oil consumption (L): 16.4
Dimension (silent type) (L× W× H) (mm): 3000× 1240× 1760
Package(plywood case) dimension (silent type) (L× W× H)(mm) 3100× 1340× 1910
Net weight (silent type) (kg): 1100
Gross weight (silenttype) (kg): 1250
The main parameters of the diesel engine
Brand: CUMMINS
Model: 6BT5.9-G2
Type: four strokes, waste gas turbine boost, direct spurting type
Cylinder: 4 cylinders
Cooling way: water cooling
Rotating speed: 1500r/min
The regulation of rotating speed: Electrical speed regulator
Starting way: DC24V starting with electricity
The main parameters of the generator
Brand: Kaijieli(China-French joint venture Leory Somer technology)
Model: TWGII224FC
Type: Brushless, Self-excite, AVR automatic voltage regulating
The connecting way of the phase: three phases four lines
Insulation degree: H degree
Enclosure degree: IP21-IP23
4. Specification of control Panel(with KAIXUN LCD controller)
The control panel is Ordinary integrative type control panel, with the display of voltage, current, frequency, water temperature, oil pressure. The genset with low oil pressure, high water temperature, over speed, over load protection function.
The features of KAIXUN LCD controller:
KAIXUN LCD controller adopts high performance computer chip, can modify control procedure and protection parameters of generator, which incorporating measure, control, protection and three remote functions and so on, can fully satisfactory different kinds of Genset auto control requirements for generator user and or special assembly factory.
The controller measure and display all output digital parameters for generator, and rpm, oil pressure, water temperature, DC voltage and runtime for engine. And the voltage and current use real virtual value measure to make sure the data more exacter.
• Chinese/English menu for your choice, large LCD display.
• Can select kinds of preset PT-sensor, and can custom parameter by corresponding software.
• Keys on control panel are used for selecting control mode, startup running procedure, data display and modify the protection parameter. LED indicator is used for indicating the controller running mode and Genset running status, and LCD display measuring parameter and status.
• Can select RS485 or RS232 communication port, realizing long distance monitor, and or fully realizing remote signaling, telemetering and remote control functions by communication with PC, can read and setting controller running parameter.
• The controller is assembled by high strength plasticized panel and powdered steel shell, all connection are connected by pin-like and locked up terminal, more easier and convenient to connect, move, maintain and replace.
Datos del Vendedor
Consultar Gratis
Otros productos de esta empresa
