Genset Model KTC-1000GF
Genset Output Power 800KW
Rated Voltage 380/220V
Power Factor(COS) 0.8(lagging)
Dimension (L× W× H) (mm) 4500× 2060× 2430
Net weight (kg) 7150
Brand CCEC Cummins
Engine Structure V type 12 cylinder, 4 stroke, turbocharged
Rotating Speed 1500r/min
Engine Cooling Method Radiator for ambient temp 40 O C, belt driven cooling fan with cover
Governor System Precise electrical governor system
Starting Method 24V DC, with Silicon commutating charging motor
Engine Filter System Dry type air filter, fuel filter, oil filter, coolant filter
Compression Ratio 14.51
Bore× Stroke(mm) 159× 159
100% load fuel consumption (L/h) 191
Lube capacity(L) 135
Brand Kaijieli(China-French joint venture Leory Somer technology)
Excite Type Brushless, Self-exciting, AVR automatic voltage regulating
Connecting Type 3 Phase and 4 Wires
Steady Frequency Change 05%
No load voltage ≥ 95%105%
Steady voltage ≤ ± 1%
Insulation degree H degree
Enclosure degree IP21
4. Specification of control Panel(with KAIXUN LCD controller)
The control panel is Ordinary integrative type control panel, with the display of voltage, current, frequency, water temperature, oil pressure. The genset with low oil pressure, high water temperature, over speed, over load protection function.
The features of KAIXUN LCD controller:
KAIXUN LCD controller adopts high performance computer chip, can modify control procedure and protection parameters of generator, which incorporating measure, control, protection and three remote functions and so on, can fully satisfactory different kinds of Genset auto control requirements for generator user and or special assembly factory.
The controller measure and display all output digital parameters for generator, and rpm, oil pressure, water temperature, DC voltage and runtime for engine. And the voltage and current use real virtual value measure to make sure the data more exacter.
• Chinese/English menu for your choice, large LCD display.
• Can select kinds of preset PT-sensor, and can custom parameter by corresponding software.
• Keys on control panel are used for selecting control mode, startup running procedure, data display and modify the protection parameter. LED indicator is used for indicating the controller running mode and Genset running status, and LCD display measuring parameter and status.
• Can select RS485 or RS232 communication port, realizing long distance monitor, and or fully realizing remote signaling, telemetering and remote control functions by communication with PC, can read and setting controller running parameter.
• The controller is assembled by high strength plasticized panel and powdered steel shell, all connection are connected by pin-like and locked up terminal, more easier and convenient to connect, move, maintain and replace.